RecallPlainVehicle recalls, explained in plain English

2008 Ford Crown Victoria recalls & complaints

3 high-risk recalls and 50 owner complaints. Check every recall is completed before buying.
3recalls
3high risk
0stop-driving
50complaints

Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.

3 safety recalls, most serious first

High risk Campaign 14V704000 · announced 05/11/2014 (12 years ago)

1. Steering

What's wrong, in plain English: If steering fails you can lose control of the car. Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly perform…

What could happen: Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.

The fix: Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact F…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2008 CROWN VICTORIA.
  2. Book a repair at any authorized Ford dealer. Quote NHTSA campaign 14V704000 (manufacturer code 14S25).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-866-436-7332.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STEERING:RACK AND PINION:PINION SHAFT
Summary: Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.
Consequence: Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
Remedy: Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 13V385000 · announced 29/08/2013 (11 years ago)

2. Steering

What's wrong, in plain English: If steering fails you can lose control of the car. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the up…

What could happen: If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.

The fix: Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If th…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2008 CROWN VICTORIA.
  2. Book a repair at any authorized Ford dealer. Quote NHTSA campaign 13V385000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-866-436-7332.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STEERING
Summary: Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.
Consequence: If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
Remedy: Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.
Notes: A separate service campaign applies to vehicles in non-corrosion states not addressed by this safety recall. Owners of these vehicles should contact Ford directly about these vehicles. For the safety recall, owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 07V270000 · announced 26/06/2007 (17 years ago)

3. Suspension

What's wrong, in plain English: Parts can break and cause loss of control. ON CERTAIN PASSENGER VEHICLES, A FRONT WHEEL BEARING AND HUB ASSEMBLY MAY FRACTURE DUE TO IMPROPER HEAT TREATMENT.

What could happen: IF A HUB FRACTURES, IT MAY POTENTIALLY DETACH FROM THE WHEEL KNUCKLE, RESULTING IN THE WHEEL BEING RETAINED ONLY BY THE BRAKE CALIPER ASSEMBLY. AS A RESULT, THE WHEEL MAY SEPARATE FROM THE VEHICLE POTENTIALLY RESULTING IN A CRASH.

The fix: DEALERS WILL INSPECT BOTH FRONT WHEEL BEARING AND HUB ASSEMBLIES AND REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON JUNE 22, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2008 CROWN VICTORIA.
  2. Book a repair at any authorized Ford dealer. Quote NHTSA campaign 07V270000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-392-3673.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: SUSPENSION:FRONT:HUB
Summary: ON CERTAIN PASSENGER VEHICLES, A FRONT WHEEL BEARING AND HUB ASSEMBLY MAY FRACTURE DUE TO IMPROPER HEAT TREATMENT.
Consequence: IF A HUB FRACTURES, IT MAY POTENTIALLY DETACH FROM THE WHEEL KNUCKLE, RESULTING IN THE WHEEL BEING RETAINED ONLY BY THE BRAKE CALIPER ASSEMBLY. AS A RESULT, THE WHEEL MAY SEPARATE FROM THE VEHICLE POTENTIALLY RESULTING IN A CRASH.
Remedy: DEALERS WILL INSPECT BOTH FRONT WHEEL BEARING AND HUB ASSEMBLIES AND REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON JUNE 22, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Notes: FORD RECALL NO. 07S54. CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

50complaints
11crashes
3fires
6injuries
1deaths

Most complained-about parts: Steering (25), Vehicle Speed Control (11), Suspension (6), Electrical system (5), Transmission / drivetrain (3).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (8)

08/04/2023 · Electrical system
Complete instrument cluster failure, no lights illuminate except turn signals. Speed, rpm’s, fuel level, temperature, are completely off instrument cluster is completely dark when driving at night, told that the solders on the cluster are bad. (Defective?)

05/17/2023 · Transmission / drivetrain
The contact owns 2008 Ford Crown Victoria. The contact stated that the vehicle failed to reverse while the transmission was shifted into reverse(R). The vehicle was towed to an independent mechanic, who replaced the linkage. The manufacturer was not made aware of the failure. The failure mileage was approximately 115,000.

10/05/2022 · Lights
The contact owns a 2008 Ford Crown Victoria. The contact stated while driving 55 MPH in a dark area with the high beam headlights activated, the headlights became inoperable. There was no warning light illuminated. The contact stated that the low beam headlights were activated to continue driving. The vehicle was not taken to the dealer. The contact stated…

08/24/2022 · Steering
The contact owns a 2008 Ford Crown Victoria. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The contact inspected the steering column underneath the hood and noticed that the steering shaft was corroded. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. T…

07/29/2022 · Steering
The right front wheel hub broke at the weld when turning in a parking lot. The part is available for inspection. Had this happened at freeway speed, the right front wheel would have departed the vehicle. The safety hazards are obvious. I attempted to contact customer service and they did not reply.There was no warning sign and the part has not been inspect…

05/28/2021 · Steering
I purchased this vehicle a week ago and I also downloaded car fax and it states my vehicle was due for a recall in 2014 but the previous owner next got it.

07/14/2020 · Fuel system
2008 FORD INTERSEPTER GAS TANK STRAPS AND TANK FELL. VEHICAL WAS TOWED TO A FORD.

06/22/2020 · Steering
TL* THE CONTACT OWNS A 2008 FORD CROWN VICTORIA. THE CONTACT STATED THAT WHILE DRIVING AT 70 MPH, THE STEERING WHEEL INDEPENDENTLY TURNED 180 DEGREES. THE CONTACT REGAINED CONTROL OF THE VEHICLE, AND PULLED OVER AND PARKED THE VEHICLE. THE CONTACT INSPECTED THE VEHICLE AND BECAME AWARE OF A LOOSENED STEERING SHAFT BUSHING. THE VEHICLE WAS TOWED TO THE RESID…

Compare

2005 Crown Victoria2006 Crown Victoria2007 Crown Victoria2009 Crown Victoria2010 Crown Victoria2011 Crown Victoria2008 Escape2008 Escape Hybrid2008 F-1502008 Fusion2008 F-2502008 F-3502008 Expedition2008 Ranger2008 E-1502008 E-350 15 Passenger2008 Edge2008 Mustang