2019 Subaru Ascent recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.
9 safety recalls, most serious first
1. Transmission / drivetrain
What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The transmission hydraulic sensor may inaccurately measure the hydraulic fluid pressure.
What could happen: If the fluid pressure is measured higher than its actual value, the hydraulic pressure will be reduced. If this occurs, the transmission drive chain may not have the proper tension, resulting in a loss of drive power and an increased risk of a crash.
The fix: Subaru will notify owners, and dealers will reprogram the transmission control unit. The hydraulic sensor harness will be replaced on vehicles with certain stored diagnostic trouble codes. In addition, any vehicle confirmed to have experienced low drive chain tension will have the transmission assembly will be repla…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 19V855000 (manufacturer code WUV-07).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019 Ascent vehicles. The transmission hydraulic sensor may inaccurately measure the hydraulic fluid pressure.
Consequence: If the fluid pressure is measured higher than its actual value, the hydraulic pressure will be reduced. If this occurs, the transmission drive chain may not have the proper tension, resulting in a loss of drive power and an increased risk of a crash.
Remedy: Subaru will notify owners, and dealers will reprogram the transmission control unit. The hydraulic sensor harness will be replaced on vehicles with certain stored diagnostic trouble codes. In addition, any vehicle confirmed to have experienced low drive chain tension will have the transmission assembly will be replaced. All repairs will be free of charge. The recall began January 31, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUV-07.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2. Transmission / drivetrain
What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
What could happen: An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
The fix: Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehi…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 21V955000 (manufacturer code WRK-21).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Consequence: An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy: Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
3. Fuel system
What's wrong, in plain English: Fuel lines, tank or pump. Fuel problems usually mean a leak, and leaks mean fire risk. The low-pressure fuel pump inside the fuel tank may fail.
What could happen: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
The fix: Dealers will replace the low-pressure fuel pump, free of charge. Owner notification letters were mailed September 24, 2021. Subaru and Toyota owners may call customer service at 1-844-373-6614. Subaru's number for this recall is WRG-21.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 21V587000 (manufacturer code WRG-21).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2018 Forester, 2018-2020 Impreza, Legacy, Outback, 2018-2019 BRZ, WRX, and Toyota 86 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Consequence: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy: Dealers will replace the low-pressure fuel pump, free of charge. Owner notification letters were mailed September 24, 2021. Subaru and Toyota owners may call customer service at 1-844-373-6614. Subaru's number for this recall is WRG-21.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
4. Fuel system
What's wrong, in plain English: Fuel lines, tank or pump. Fuel problems usually mean a leak, and leaks mean fire risk. The low pressure fuel pump may become inoperative.
What could happen: If the low pressure fuel pump fails, the engine may stall without the ability to restart the vehicle, increasing the risk of a crash.
The fix: Subaru will notify owners, and dealers will replace the low pressure fuel pump, free of charge. The recall began June 4, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRD-20.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 20V218000 (manufacturer code WRD-20).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019 Impreza, Outback, Legacy, and Ascent vehicles. The low pressure fuel pump may become inoperative.
Consequence: If the low pressure fuel pump fails, the engine may stall without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Subaru will notify owners, and dealers will replace the low pressure fuel pump, free of charge. The recall began June 4, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRD-20.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
5. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. The aluminum Positive Crankcase Ventilation (PCV) valve can separate, allowing the separated components to enter the engine, resulting in a loss of power while driving.
What could happen: An unexpected loss of power while driving can increase the risk of a crash.
The fix: Subaru will notify owners, and dealers will inspect and replace the PCV valve, free of charge. If the PCV valve has separated and the components cannot be found, the short block engine will be replaced, free of charge. The recall began January 31, 2020. Owners may contact Subaru customer service at 1-844-373-6614.…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 19V856000 (manufacturer code WUW-08).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019 Crosstrek, Forester, and Ascent vehicles. The aluminum Positive Crankcase Ventilation (PCV) valve can separate, allowing the separated components to enter the engine, resulting in a loss of power while driving.
Consequence: An unexpected loss of power while driving can increase the risk of a crash.
Remedy: Subaru will notify owners, and dealers will inspect and replace the PCV valve, free of charge. If the PCV valve has separated and the components cannot be found, the short block engine will be replaced, free of charge. The recall began January 31, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUW-08.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
6. Transmission / drivetrain
What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The center support bolts for the driveshaft may loosen, possibly resulting in the front portion of the driveshaft disconnecting.
What could happen: If the front end of the driveshaft separates, it can increase the risk of a crash.
The fix: Subaru will notify owners, and dealers will replace the driveshaft assembly, including the center support brace, free of charge. The recall began July 26, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUI-94.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 19V519000 (manufacturer code WUI-94).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: POWER TRAIN:DRIVELINE:DRIVESHAFT
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019 Ascent vehicles. The center support bolts for the driveshaft may loosen, possibly resulting in the front portion of the driveshaft disconnecting.
Consequence: If the front end of the driveshaft separates, it can increase the risk of a crash.
Remedy: Subaru will notify owners, and dealers will replace the driveshaft assembly, including the center support brace, free of charge. The recall began July 26, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUI-94.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
7. Body / structure
What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. These vehicles may be missing spot welds on, or around, the B-Pillar, compromising vehicle strength.
What could happen: In the event of a crash, the missing spot welds may compromise the vehicle's strength, increasing the risk of injury.
The fix: Subaru will notify owners, and dealers will inspect the vehicle to check for missing spot welds. If the welds are missing, the vehicle will be replaced, free of charge. The recall began July 31, 2018. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WTU-80.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 18V508000 (manufacturer code WTU-80).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: STRUCTURE:BODY:ROOF AND PILLARS
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019 Subaru Ascent vehicles. These vehicles may be missing spot welds on, or around, the B-Pillar, compromising vehicle strength.
Consequence: In the event of a crash, the missing spot welds may compromise the vehicle's strength, increasing the risk of injury.
Remedy: Subaru will notify owners, and dealers will inspect the vehicle to check for missing spot welds. If the welds are missing, the vehicle will be replaced, free of charge. The recall began July 31, 2018. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WTU-80.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
8. Electrical system
What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. The ground bolt that secures the ground terminal of the Positive Temperature Coefficient (PTC) heater may have been improperly fastened, which could result in melting of the ground terminal and surrounding components.
What could happen: A melting ground terminal increases the risk of a fire.
The fix: Owners are advised to park their vehicle away from structures and to avoid leaving the vehicle unattended while the engine is running. An owner who notices or smells smoke coming from the dash or driver's footwell area should immediately stop operating the vehicle and turn the ignition switch to the "Off" position.…
What to do
- Park outside, away from houses, garages and other cars — there is a fire risk even when the vehicle is off.
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 22V907000 (manufacturer code WRL-22).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2019-2022 Ascent vehicles. The ground bolt that secures the ground terminal of the Positive Temperature Coefficient (PTC) heater may have been improperly fastened, which could result in melting of the ground terminal and surrounding components.
Consequence: A melting ground terminal increases the risk of a fire.
Remedy: Owners are advised to park their vehicle away from structures and to avoid leaving the vehicle unattended while the engine is running. An owner who notices or smells smoke coming from the dash or driver's footwell area should immediately stop operating the vehicle and turn the ignition switch to the "Off" position. Dealers will replace the PTC heater ground bolts and if necessary, replace the ground wire and the connector holder, free of charge. Owner notification letters are expected to be mailed February 6, 2023. Owners may contact Subaru's customer service at 1-844-373-6614. Subaru's number for this recall is WRL-22.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
9. Equipment
What's wrong, in plain English: A part or accessory supplied with the vehicle. These vehicles were manufactured with an incorrect Gross Axle Weight Rating (GAWR) on the certification label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) 110, "Tire selection and rims."
What could happen: An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
The fix: Subaru will mail a new certification label to owners, free of charge. Owners may also choose to have a dealer install the new label, free of charge. Letters informing owners of the safety risk were mailed August 27, 2026. Additional letters will be mailed once the remedy is available. Owners may contact Subaru custome…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2019 ASCENT.
- Book a repair at any authorized Subaru dealer. Quote NHTSA campaign 26V436000 (manufacturer code WRH-26).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-844-373-6614.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: EQUIPMENT:OTHER:LABELS
Summary: Subaru of America, Inc. (Subaru) is recalling certain 2026 Crosstrek Hybrid, 2025-2026 Forester Hybrid, Forester, and 2019-2026 Ascent vehicles. These vehicles were manufactured with an incorrect Gross Axle Weight Rating (GAWR) on the certification label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) 110, "Tire selection and rims."
Consequence: An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
Remedy: Subaru will mail a new certification label to owners, free of charge. Owners may also choose to have a dealer install the new label, free of charge. Letters informing owners of the safety risk were mailed August 27, 2026. Additional letters will be mailed once the remedy is available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRH-26.
Notes:
Useful for owners
- OBD2 code reader — see what the car's computer is reporting
- Compact car fire extinguisher
- Portable jump starter
- 2019 Subaru Ascent owner's manual
Owner complaints filed with NHTSA
Most complained-about parts: Electrical system (160), Transmission / drivetrain (89), Visibility (wipers / glass) (81), Unknown Or Other (59), Engine (48).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
10/07/2026 · Transmission / drivetrain
CVT IS SLIPPING AND FAILING INTERNALLY, CVT ASSEMBLY REQUIRES REPLACEMENT.
09/06/2026 · Suspension
Subaru of America has a Bulletin out that changes the front suspension arms for both front ends. The dealership made this correction and now the front end rattles like there are loose parts. Dealership says they don’t hear it. Won’t investigate more unless I pay them a diagnostic fee. If Subaru of America knows this vehicle has a faulty part that causes th…
09/04/2026 · Body / structure
The contact owns a 2019 Subaru Accent. The contact stated that while driving 60 MPH, the hood was shaking and vibrating abnormally. The dealer was made aware of the failure. The vehicle was taken to the dealer. The contact was informed that an unknown adjustment was needed. Additionally, the shocks were replaced, but the failure reoccurred. The vehicle was…
08/19/2026 · Body / structure
Immediately after pushing the lift gate release button on the dash, a loud and constant alarm tone began. The gate would then not open using the button on the dash, remote, or handle on the exterior of the lift gate door. To access the items in the rear (and to stop the alarm), we needed to get the door open. We followed the owner's manual exactly to acces…
08/14/2026 · Transmission / drivetrain
The vehicle has 178k miles on it currently. I had to have a transmission and transfer case replaced at 68k miles. Done by Subaru. At 168k miles I had to have a new front pump in the transmission case replaced. Repair done by Subaru. Now at 178k miles the second replacement transmission has completely failed and needs replaced.
08/06/2026 · Transmission / drivetrain
All the safety systems become disabled and check Engine light goes on because transmission fluid is being pumped Out of a faulty secondary pressure sensor part 31878aa020,( defective and replaced with 31878aa021), into the engines wiring at the car computer, transmission computer, and bulkhead connector in fuse box causing all sorts of engine codes. The se…
08/03/2026 · Transmission / drivetrain
My 2019 Subaru Ascent Limited had a safety recall that was related to a CVT transmission issue. That safety recall was addressed by Sewell Subaru (Dallas, TX) in January of 2025. This past Wednesday, July 29, I was driving on a state highway on my way to work from my residence. Not even two miles away from my residence, I felt a jerk and a loud "thud". That…
08/01/2026 · Electrical system
NHTSA Vehicle Safety Complaint Vehicle: 2019 Subaru Ascent VIN: [XXX] Mileage: 72,093 miles I am submitting this complaint because my 2019 Subaru Ascent experienced a serious transmission-related electrical failure that may represent a broader safety defect. Sewell Subaru of Dallas diagnosed an internal failure of a transmission pressure sensor. Accordin…