2013 Porsche 911 Turbo recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-20. Recalls apply to specific VINs — run your VIN to confirm.
1 safety recall, most serious first
1. Suspension
What's wrong, in plain English: Parts can break and cause loss of control. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation on 2005-2012 Porsche 911 Carrera 4 and 4S (generation 997), and 2006-2013 Porsche 911 Turbo / Turbo S (generation 997). The pin of the strut may…
What could happen: If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.
The fix: Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (POZ MN02 or POZ MN05) will receive replacement front struts (POS 5N20 or POS 5N21 - These parts are interchangeab…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2013 911 TURBO.
- Book a repair at any authorized Porsche dealer. Quote NHTSA campaign 20E091000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-336-9029.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: SUSPENSION:FRONT:MACPHERSON STRUT
Summary: Ohlins USA, Inc (Ohlins) is recalling certain Front Struts, part number POS 5N20. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation on 2005-2012 Porsche 911 Carrera 4 and 4S (generation 997), and 2006-2013 Porsche 911 Turbo / Turbo S (generation 997). The pin of the strut may experience excessive stress during maximum steering, possibly resulting breakage of the pin.
Consequence: If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.
Remedy: Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (POZ MN02 or POZ MN05) will receive replacement front struts (POS 5N20 or POS 5N21 - These parts are interchangeable), along with new top mount interface solutions, free of charge. The recall began December 22, 2020. Owners may contact Ohlins customer service at 1-800-336-9029.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Lights (3), Airbags (1), Unknown Or Other (1), Visibility (wipers / glass) (1), Engine (1).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (6)
01/21/2026 · Lights
Rear taillights can fall off the vehicle. This component is available for inspection and causes issues when other motorists are unable to see turn signals, brake lights, fog lights, and reverse lights. Mine fell off while driving on the highway and then through the city. There were no warning lights or indicating of the issue.
04/22/2025 · Airbags
The door panels at the top wrap on my 2013 Porsche 911 and I understand this is a problem on Porsches 911 delivered between 2012 - 2019 A number of recommendations have been made for owners to glue the panel. This panel is designed to release in a side impact condition and any glue modifications to this panel would violate the designed operation. The…
03/27/2024 · Lights
The taillamp housing failed, and taillamp fell out of the vehicle. Online research shows that this is a design defect that Porsche learned of early in the "991.1" generation cars, as it is reported by multiple owners at multiple sites online. Well, happened to my early 991.1 also. Porsche recognized the fatigue-failure within a year or so of launch, and…
07/13/2023 · Lights
The tail light assembly mounting fastener failed and the tail light assembly fell out of the rear bumper assembly. There was no indication of a failure while driving. Apparently this is a known issue with the 991.1 version of the 911. I’ve owned the car since new (MY 2013), have it serviced at a Porsche dealership and have not been notified of the potent…
07/05/2017 · Visibility (wipers / glass)
I WAS PULLING INTO MY GARAGE AND NEARLY RAN OVER MY WIFE DUE TO THE GLARE ON THE WINDSHIELD . THIS CAR HAS A VERY LIGHT COLORED DASH TOP. THE GARAGE WAS SHADED BUT THIS WAS A BRIGHT SUNNY DAY.
12/07/2015 · Engine
AT HIGHWAY SPEED EXPERIENCED BRIEF, COMPLETE ENGINE FAILURE, THEN SIGNIFICANTLY REDUCED ENGINE POWER FOR THE REMAINDER OF THE DRIVE. THIS TYPE OF ENGINE FAILURE IN A MANUAL TRANSMISSION RESULTED IN RAPID DECELERATION. GIVEN THIS ENGINE BRAKING IS A RESULT OF ENGINE FAILURE, THE RAPID LOSS OF SPEED HAPPENS WITHOUT BRAKE LIGHTS ALERTING OTHER DRIVERS TO SPE…