2022 Ford Edge recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
5 safety recalls, most serious first
1. Backup camera — software update
What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
What could happen: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
The fix: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2022 EDGE.
- This recall may be fixed by an over-the-air software update. Check the car's screen or app before booking a dealer visit.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:DISPLAY FUNCTION
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
2. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. 7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
What could happen: A loss of drive power increases the risk of a crash.
The fix: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2022 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 24V635000 (manufacturer code 24S55).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
3. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
What could happen: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
The fix: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2022 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V160000 (manufacturer code 25S28).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
4. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
What could happen: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
The fix: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed o…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2022 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V315000 (manufacturer code 25S49).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
5. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
What could happen: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
The fix: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recal…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2022 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V124000 (manufacturer code 26S09).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes:
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Transmission / drivetrain (46), Unknown Or Other (24), Backup camera (20), Electrical system (18), Engine (13).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
10/15/2026 · Transmission / drivetrain
I have a 2022 Ford Edge with catastrophic internal mechanical failure of the 8F35 8-speed automatic transmission and torque converter assembly. This issue became substantially noticeable in early April of 2026 (probably earlier but I was unaware it was transmission issues) while on a road trip when the vehicle was delayed in shifting into gears after coming…
10/07/2026 · Transmission / drivetrain
My 2022 Ford Edge suffered a catastrophic internal mechanical failure of the 8F35 8-speed automatic transmission and torque converter assembly. The Ford dealership service department dropped the pan and found heavy metal shavings, confirming total internal destruction. The vehicle is currently un-driveable and available for inspection at the dealership. Wh…
09/28/2026 · Electrical system
Vehicle is loosing power. New battery installed, and that battery is quickly draining as well. Recall issues not rectified as of 8/3/26
09/18/2026 · Transmission / drivetrain
I bought my 2022 ford edge (AWD Titanium) last year and not too long after that I experienced transmission shudder. I recently spoke with a technician about this and he had mentioned that other ford edges are having the same issue as mine to the point that ford has issued a TSB on this subject. I'm sure i don't need to state the danger of the possibility of…
09/02/2026 · Transmission / drivetrain
Shuddering and jerking from 20-40 mph. Dealer reports torque converter and planetary gear problems requiring expensive repairs or replacement of the transmission.
08/28/2026 · Transmission / drivetrain
The contact owns a 2022 Ford Edge. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed, however the vehicle failed to accelerate as intended. The vehicle jerked, and the transmission independently shifted into park(P). In addition, an unknown warning light was illuminated. The vehicle was towed to an independent mec…
08/27/2026 · Transmission / drivetrain
My 2022 Ford Edge Titanium (equipped with the 8F35 transmission) is exhibiting severe shuddering, jerking, harsh shifting, lurching, and hesitation. I just received the $8,500 cost estimate to rebuild the transmission on my car that is only 3 years old due to the torque converter failure. These faulty Ford Motor Co transmissions are on back-order due to so…
08/12/2026 · Electrical system
The contact owns a 2022 Ford Edge. The contact stated that after purchasing the vehicle, she was notified of an unknown recall requiring a software update. The software update was completed. The contact stated that while driving on several occasions at various speeds, the infotainment screen went black, and the contact was unable to access the heat, A/C, or…