2009 Dodge Avenger recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
2 safety recalls, most serious first
1. Fuel system
What's wrong, in plain English: Fuel lines, tank or pump. Fuel problems usually mean a leak, and leaks mean fire risk. A COMPATIBILITY ISSUE BETWEEN THE INSTRUMENT CLUSTER SOFTWARE AND FUEL PUMP MODULE CAN RESULT IN THE FUEL GAUGE OVERSTATING THE ACTUAL FUEL TANK LEVEL. AS A RESULT, THE VEHICLE MAY RUN OUT OF FUEL WHEN THE GAUGE INDICATES THAT THERE IS STILL FUEL REMAINING IN THE TANK.
What could happen: THIS COULD CAUSE A CRASH WITHOUT WARNING.
The fix: DEALERS WILL REPLACE THE FUEL PUMP MODULE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MARCH 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2009 AVENGER.
- Book a repair at any authorized Dodge dealer. Quote NHTSA campaign 09V047000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-853-1403.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
Summary: CHRYSLER IS RECALLING 91 MY 2009 SEBRING AND DODGE AVENGER EQUIPPED WITH 2.4L ENGINE PASSENGER VEHICLES. A COMPATIBILITY ISSUE BETWEEN THE INSTRUMENT CLUSTER SOFTWARE AND FUEL PUMP MODULE CAN RESULT IN THE FUEL GAUGE OVERSTATING THE ACTUAL FUEL TANK LEVEL. AS A RESULT, THE VEHICLE MAY RUN OUT OF FUEL WHEN THE GAUGE INDICATES THAT THERE IS STILL FUEL REMAINING IN THE TANK.
Consequence: THIS COULD CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE FUEL PUMP MODULE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MARCH 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Notes: CHRYSLER RECALL NO. J02. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
2. Transmission / drivetrain
What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. A NEW ADHESIVE USED IN THE POWER TRAIN CONTROL MODULE (PCM) MANUFACTURING PROCESS CAN CAUSE THE PRINTED CIRCUIT BOARD TO BREAK.
What could happen: THIS CAN CAUSE THE ENGINE TO STALL AND CAUSE A CRASH WITHOUT WARNING.
The fix: DEALERS WILL REPLACE THE PCM FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 10, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2009 AVENGER.
- Book a repair at any authorized Dodge dealer. Quote NHTSA campaign 08V528000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-853-1403.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
Summary: CHRYSLER IS RECALLING 712 MY 2009 SEBRING, DODGE CALIBER, AVENGER, JOURNEY, JEEP PATRIOT, AND COMPASS VEHICLES. A NEW ADHESIVE USED IN THE POWER TRAIN CONTROL MODULE (PCM) MANUFACTURING PROCESS CAN CAUSE THE PRINTED CIRCUIT BOARD TO BREAK.
Consequence: THIS CAN CAUSE THE ENGINE TO STALL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE PCM FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 10, 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Notes: CHRYSLER RECALL NO. H33. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236
(TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Engine (12), Airbags (11), Fuel system (10), Transmission / drivetrain (10), Electrical system (10).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
03/16/2026 · Brakes
The anti lock brake system malfunctioned, the ABS, ESP/BAS and traction control lights are on. It kicked a code C2116 which reads ABS pump motor supply low voltage. I took it to a brake shop and they said the pump motor needs replaces but I would have to find one since they don’t stock it. I call several Dodge dealers and was told the part is discontinued a…
02/13/2024 · Visibility (wipers / glass)
The contact owns a 2009 Dodge Avenger. The contact stated while driving at various speeds in the rain and snow, the windshield wipers shuddered and stopped working. The vehicle was taken to the local dealer, where it was diagnosed that there was corrosion detected and that the wiper motor needed to be replaced. The vehicle was repaired, but the failure recu…
07/17/2022 · Visibility (wipers / glass)
I GOT THIS CAR MAY 13 2019 EVERY SINCE I HAD THIS CAR THE WIPER STOP WORKING WHEN IAM DRIVEING IN RAIN AND SNOW. I TOOK THIS CAR BACK TO DEALERSHIP IN 2019 2020 AND 2021 AND THEY SEND ME HOME AND SAY THERE NOTHING WRONG WITH THE WIPER. NOW IT 7/2022 IT RAIN AND THE WIPER STOP AGAIN WE COULD GOTTEN KILL ON HIGHWAY FROM COLUMBUS GOING BACK TO SPITZER MOTER TO…
11/15/2021 · Unknown Or Other
Two recalls on my part my car Power train: automatic transmission: control module (tcm, pcm) Fuel system, other: storage: fuel gauge system
08/17/2021 · Airbags
Warning light airbags
10/18/2020 · Airbags
THE PCMCIA LIGHT COMES ON THEN GOES OFF.CAR WILL SOME TIMES CHUGS AND WANTS TO SHUT OFF IN MOTION
07/12/2020 · Seat belts
THE DRIVER SEATBELT GETS REALLY LOOSE AND THERE IS NO WAY TO GET IT TIGHTENED. I HAVE HAD TO SIT ON IT TO MAKE IT TIGHT ENOUGH AROUND MY WAIST.
06/27/2020 · Engine
INTAKE MANIFOLD RUNNER CONTROL WAS NOT OPENING AND CLOSING PROPERLY SO I HAD TO REPLACE THE INTAKE MANIFOLD. *TR