RecallPlainVehicle recalls, explained in plain English

2013 BMW S 1000 Rr recalls & complaints

1 recall on file (0 high risk). Normal for this age of vehicle — just make sure they're done.
1recalls
0high risk
0stop-driving
2complaints

Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.

1 safety recall, most serious first

Moderate Campaign 12V585000 · announced 14/12/2012 (13 years ago)

1. Body / structure

What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. Due to a manufacturing fault, the side-stand attachment bolts could start to loosen. The loosening of the side-stand bolts could cause the stand to separate from the frame of the motorcycle.

What could happen: A separation of the side-stand could cause the motorcycle to fall, causing a risk of injury.

The fix: BMW will notify owners, and dealers will clean the sidestand mounting plate threads and replace the side-stand mounting plate bolts, free of charge. The recall began on January 29, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2013 S 1000 RR.
  2. Book a repair at any authorized BMW dealer. Quote NHTSA campaign 12V585000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-525-7417.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND
Summary: BMW is recalling certain model year 2012-2013 S 1000 RR motorcycles manufactured September 2011, through December 2012. Due to a manufacturing fault, the side-stand attachment bolts could start to loosen. The loosening of the side-stand bolts could cause the stand to separate from the frame of the motorcycle.
Consequence: A separation of the side-stand could cause the motorcycle to fall, causing a risk of injury.
Remedy: BMW will notify owners, and dealers will clean the sidestand mounting plate threads and replace the side-stand mounting plate bolts, free of charge. The recall began on January 29, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

2complaints
0crashes
0fires
0injuries
0deaths

Most complained-about parts: Body / structure (1), Brakes (1).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (2)

05/31/2016 · Body / structure
TL* THE CONTACT OWNS A 2013 BMW S 1000 RR. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 45 MPH, THE RPMS DECREASED AND THE VEHICLE LUNGED FORWARD UNINTENDED. THE VEHICLE STALLED AND AFTER RESTARTING, IT RESUMED TO NORMAL. THE FAILURE RECURRED SPORADICALLY. THE CONTACT MENTIONED THAT THE SIDE STAND BOLT LOOSENED CAUSING THE SENSOR TO BECOME INOPERATIV…

02/27/2014 · Brakes
TL* THE CONTACT OWNS A 2013 BMW S 1000 RR MOTORCYCLE. THE CONTACT STATED THAT THE FRONT BRAKES WOULD NOT ENGAGE UNLESS THE CONTACT REPEATEDLY PUMPED THE PEDAL. THE CONTACT TOOK THE VEHICLE TO THE DEALER WHERE HE WAS AWAITING DIAGNOSIS OF THE FAILURE. THE MANUFACTURER WAS NOT CONTACTED. THE APPROXIMATE FAILURE MILEAGE WAS 4,000. THE VIN WAS NOT AVAILABLE.

Compare

2010 S 1000 Rr2011 S 1000 Rr2012 S 1000 Rr2014 S 1000 Rr2015 S 1000 Rr2016 S 1000 Rr2013 X5 M2013 X5 Xdrive35d2013 X5 Xdrive35i2013 X5 Xdrive50i2013 328i2013 328i Xdrive2013 335i2013 335i Xdrive2013 Active Hybrid 32013 335is Hp2013 528i2013 528i Xdrive