2013 BMW M6 recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
2 safety recalls, most serious first
1. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.
What could happen: Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
The fix: BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.
What to do
- Do not drive this vehicle until the recall repair is done. The manufacturer has told owners to park it.
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2013 M6.
- Book a repair at any authorized BMW dealer. Quote NHTSA campaign 12V475000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-525-7417.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:ENGINE
Summary: BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.
Consequence: Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
Remedy: BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall began on November 30, 2012. Owners may contact BMW at 1-800-525-7417.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2. Airbags
What's wrong, in plain English: The airbag system — the part that is supposed to protect you in a crash. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.
What could happen: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
The fix: BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2013 M6.
- Book a repair at any authorized BMW dealer. Quote NHTSA campaign 17V495000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-525-7417.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Summary: BMW of North America, LLC. (BMW) is recalling certain 2012-2013 BMW X3 xDrive28i, X3 xDrive35i, and M6 Convertible vehicles and 2013 M6 Coupe vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
Remedy: BMW will notify owners, and dealers will replace the driver's front air bag module, free of charge. The recall began October 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Engine (2), Vehicle Speed Control (1), Unknown Or Other (1).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (2)
11/10/2021 · Engine
The contact owns a 2013 BMW M6. The contact stated that while driving at 80 MPH, the vehicle stalled. No warning lights were illuminated. The vehicle was towed to the dealer. The vehicle was diagnosed with engine failure, and that the engine needed to be replaced. The vehicle was not repaired and was towed to the contact's residence. The manufacturer was ma…
04/19/2021 · Vehicle Speed Control
HELLO, I BOUGHT A USED 2013 BMW M6 WITH ABOUT 77K MILES ON IT FROM DCH MONTCLAIR ACURA IN NJ, AND SINCE I BOUGHT IT THE CAR HAS HAD PROBLEMS AND I TRIED TO RETURN IT TO THEM A FEW TIMES BUT THEY JUST BRUSHED ME OFF AND CURRENTLY MY CAR NEEDS A NEW ENGINE AND IT HAS BEEN IN THE SHOP SINCE LAST YEAR (2020). THEY HAVE REFUSED TO DO ANYTHING ABOUT IT AND ARE…